Preparation of Graphene Oxide-loaded Nickel with Excellent Antibacterial Property by Magnetic Field-Assisted Scanning Jet Electrodeposition

Guibin Lou, Ya Chen, Junwei Xu, Yingjuan Qian, Haixia Cheng, Zhen Wei, Youwen Yang, Lida Shen, Cijun Shuai

Article ID: 432
Vol 8, Issue 1, 2022, Article identifier:432

VIEWS - 6851 (Abstract) 626 (PDF) 407 (Supp.File)


Graphene oxide (GO) is recognized as a promising antibacterial material that is expected to be used to prepare a new generation of high-efficiency antibacterial coatings. The propensity of GO to agglomeration makes it difficult to apply it effectively. A new method of preparing GO-loaded nickel (GNC) with excellent antibacterial property is proposed in this paper. In this work, GNC was prepared on a titanium sheet by magnetic field-assisted scanning jet electrodeposition. The massive introduction of GO on the coating was proven by energy disperse spectroscopy and Raman spectroscopy. The antibacterial performance of GNC was proven by agar plate assessment and cell living/dead staining. The detection of intracellular reactive oxygen species (ROS) and the concentration of nickel ions, indicate that the antibacterial property of GNC are not entirely derived from the nickel ions released by the coating and the intracellular ROS induced by nickel ions, but rather are due to the synergistic effect of nickel ions and GO.


Graphene oxide, Antibacterial coating, Jet electrodeposition, Nickel

Included Database


Simoes M, Simoes LC, Vieira MJ, 2010, A Review of Current and Emergent Biofilm Control Strategies. Lwt Food Sci Technol, 43:573–83.

Pistone A, Scolaro C, Visco A, 2021, Mechanical Properties of Protective Coatings against Marine Fouling: A Review. Polymers (Basel), 13:173.

Angell P, Urbanic K, 2000, Sulphate-reducing Bacterial Activity as a Parameter to Predict Localized Corrosion of Stainless Alloys. Corro Sci, 42:897–912.

Veerachamy S, Yarlagadda T, Manivasagam G, et al., 2014, Bacterial Adherence and Biofilm Formation on Medical Implants: A Review. Proc Inst Mech Eng Part H, 228:1083–99.

Cloutier M, Mantovani D, Rosei F, 2015, Antibacterial Coatings: Challenges, Perspectives, and Opportunities. Trends Biotechnol, 33:637–52.

Bandara CD, Singh S, Afara IO, et al., 2017, Bactericidal Effects of Natural Nanotopography of Dragonfly Wing on Escherichia coli. ACS Appl Mater Interfaces, 9:6746–60.

Ivanova EP, Hasan J, Webb HK, et al., 2012, Natural Bactericidal Surfaces: Mechanical Rupture of Pseudomonas aeruginosa Cells by Cicada Wings. Small, 8:2489–94.

Kazemzadeh-Narbat M, Lai BF, Ding C, et al., 2013, Multilayered Coating on Titanium for Controlled Release of Antimicrobial Peptides for the Prevention of Implant associated Infections. Biomaterials, 34:5969–77.

Park S, Kim HH, Bin Yang S, et al., 2018, A Polysaccharide-Based Antibacterial Coating with Improved Durability for Clear Overlay Appliances. ACS Appl Mater Interfaces, 10:17714–21.

Peng L, Chang L, Liu X, et al., 2017, Antibacterial Property of a Polyethylene Glycol-Grafted Dental Material. ACS Appl Mater Interfaces, 9:17688–692.

Zhao Q, Liu C, Su X, et al., 2013, Antibacterial Characteristics of Electroless Plating Ni-P-TiO2 Coatings. Appl Surf Sci, 274:101–4.

Dreyer DR, Park S, Bielawski CW, et al., 2010, The Chemistry of Graphene Oxide. Chem Soc Rev, 39:228–40.

Baek SH, Roh J, Park CY, et al., 2020, Cu-nanoflower Decorated Gold Nanoparticles-graphene Oxide Nanofiber as Electrochemical Biosensor for Glucose Detection. Mater Sci Eng C Mater, 107:110273.

Singh V, Kumar V, Kashyap S, et al., 2019, Graphene Oxide Synergistically Enhances Antibiotic Efficacy in Vancomycin-Resistant Staphylococcus aureus. ACS Appl Bio Mater, 2:1148–57.

Kuila T, Mishra AK, Khanra P, et al., 2013, Recent Advances in the Efficient Reduction of Graphene Oxide and its Application as Energy Storage Electrode Materials. Nanoscale, 5:52–71.

Shih CJ, Lin S, Sharma R, et al., 2013, Understanding the pH dependent Behavior of Graphene Oxide Aqueous Solutions: A Comparative Experimental and Molecular Dynamics Simulation Study. Langmuir, 28:235–41.

Hu W, Peng C, Luo W, et al., 2010, Graphene-Based Antibacterial Paper, ACS Nano 4:4317–23.

Akhavan O, Ghaderi E, 2010, Toxicity of Graphene and Graphene Oxide Nano walls Against Bacteria. ACS Nano, 4:5731–6.

Ahmed F, Rodrigues DF, 2013, Investigation of Acute Effects of Graphene Oxide on Wastewater Microbial Community: A Case Study. J Hazard Mater, 256:33–9.

Carpio IE, Santos CM, Wei X, et al., 2012, Toxicity of a Polymer-graphene Oxide Composite Against Bacterial Planktonic Cells, Biofilms, and Mammalian Cells. Nanoscale, 4:4746–56.

Zou X, Zhang L, Wang Z, et al., 2016, Mechanisms of the Antimicrobial Activities of Graphene Materials. J Am Chem Soc, 138:2064–77.

Tu Y, Lv M, Xiu P, et al., 2013, Destructive Extraction of Phospholipids from Escherichia coli Membranes by Graphene Nanosheets. Nat Nanotechnol, 8:594–601.

Konwar A, Kalita S, Kotoky J, et al., 2016, Chitosan-Iron Oxide Coated Graphene Oxide Nanocomposite Hydrogel: A Robust and Soft Antimicrobial Biofilm. ACS Appl Mater Interfaces, 8:20625–34.

Liu Y, Wen J, Gao Y, et al., 2018, Antibacterial Graphene Oxide Coatings on Polymer Substrate. Appl Surf Sci, 436:624–30.

Zhao Z, Meng F, Tang J, et al., 2019, A Novel Method of Fabricating an Antibacterial Aluminum-matrix Composite Coating Doped Graphene/Silver-nanoparticles. Mater Lett, 245:211–4.

Goh GL, Zhang H, Chong TH, et al., 2021, 3D Printing of Multilayered and Multimaterial Electronics: A Review. Adv Electron Mater, 2021:2100445.

Mahmood MA, Banica A, Ristoscu C, et al., 2021, Laser Coatings via State-of-the-Art Additive Manufacturing: A Review. Coatings, 11:296.

Saengchairat N, Tran T, Chua CK, 2017, A Review: Additive Manufacturing for Active Electronic Components. Virtual Phys Prototype, 12:31–46.

Shuai CJ, Yang ML, Deng F, et al., 2020, Forming Quality, Mechanical Properties, and Anti-inflammatory Activity of Additive Manufactured Zn-Nd Alloy. J Zhejiang Univ A, 21:876–91.

Veres J, Bringans RD, Chow EM, et al., 2016, Additive Manufacturing for Electronics “Beyond Moore”. San Francisco, CA, USA: Proceedings of 2016 IEEE International Electron Devices Meeting, p25-6.

Choe YE, Kim GH, 2020, A PCL/Cellulose Coil-shaped Scaffold via a Modified Electrohydrodynamic Jetting Process. Virtual Phys Prototype, 15:403–16.

Goh GL, Agarwala S, Yeong WY, 2018, High Resolution Aerosol Jet Printing of Conductive Ink for Stretchable Electronics. Proceedings of the 3rd International Conference on Progress in Additive Manufacturing, p109–14.

Goh GL, Tay MF, Lee JM, et al., 2021, Potential of Printed Electrodes for Electrochemical Impedance Spectroscopy (EIS): Toward Membrane Fouling Detection. Adv Electron Mater, 2021:2100043.

Wang Z, Zhang G, Huang H, et al., 2021, The Self-induced Electric-field-driven Jet Printing for Fabricating Ultrafine Silver Grid Transparent Electrode. Virtual Phys Prototy, 16:113–23.

Ning F, Cong W, Hu Y, et al., 2017, Additive Manufacturing of Carbon Fiber-reinforced Plastic Composites Using Fused Deposition Modeling: Effects of Process Parameters on Tensile Properties. J Compos Mater, 51:451–62.

Alemohammad H, Toyserkani E, 2010, Laser-assisted Additive Fabrication of Micro-sized Coatings. Adv Laser Mater Process, 2010:735–62.

Hirt L, Ihle S, Pan Z, et al., 2016, Template-Free 3D Microprinting of Metals Using a Force-Controlled Nanopipette for Layer-by-Layer Electrodeposition. Adv Mater, 28:2311–5.

Jiang W, Shen L, Qiu M, et al., 2018, Preparation of Ni-SiC composite coatings by magnetic field-enhanced jet electrodeposition. J Alloys Compd, 762:115–24.

Qiao GY, Jing TF, Wang N, et al., 2005, High-speed Jet Electrodeposition and Microstructure of Nanocrystalline Ni-Co Alloys. Electrochim Acta, 51:85–92.

Shen L, Xu M, Jiang W, et al., 2019, A Novel Superhydrophobic Ni/Nip Coating Fabricated by Magnetic Field Induced Selective Scanning Electrodeposition. Appl Surf Sci, 489:25–33.

Xu M, Shen L, Jiang W, et al., 2019, Fabrication of Ni- SiC Superhydrophilic Surface by Magnetic Field-assisted Scanning Electrodeposition. J Alloys Compd, 799:224–30.

Ji L, Chen F, Huang H, et al., 2018, Preparation of Nickel-Graphene Composites by Jet Electrodeposition and the Influence of Graphene Oxide Concentration on the Morphologies and Properties. Surf Coat Technol, 351:212–9.

Arghavanian R, Bostani B, Parvini-Ahmadi N, et al., 2014, Field-enhanced Co-electrodeposition of Zirconia Particles with a Magnetic Shell During Ni Electrodeposition. Surf Coat Technol, 258:1171–5.

Jena G, Anandkumar B, Sofia S, et al., 2020, Fabrication of Silanized GO Hybrid Coating on 316L SS with Enhanced Corrosion Resistance and Antibacterial Properties for Marine Applications. Surf Coat Technol, 402:126295.

Jena G, Vanithakumari SC, Polaki SR, et al., 2019, Electrophoretically Deposited Graphene Oxide-polymer Bilayer Coating on Cu-Ni Alloy with Enhanced Corrosion Resistance in Simulated Chloride Environment. J Coat Technol Res, 16:1317–35.

Gautier N, 1995, Theoretical Study of the Interaction between a Magnetic Nanotip and a Magnetic Surface. Phys Rev B, 52:7352–62.

Stone HA, Lister JR, Brenner MP, 1999, Drops with Conical Ends in Electric and Magnetic Fields. Proc R Soc A Math Phys Eng Sci, 455:329–47.

Pavithra CL, Sarada BV, Rajulapati KV, et al., 2014, A New Electrochemical Approach for the Synthesis of Copper-Graphene Nanocomposite Foils with High Hardness. Sci Rep, 4:4049.

Qiu J, Liu L, Qian S, et al., 2021, Why does Nitrogen-doped Graphene Oxide Lose the Antibacterial Activity? J Mater Sci Technol, 62:44–51.

Shuai C, Guo W, Gao C, et al., 2018, An nMgO Containing Scaffold: Antibacterial Activity, Degradation Properties and Cell Responses. Int J Bioprint, 4:120.

Xie B, Zhao MC, Xu R, et al., 2021, Biodegradation, Antibacterial Performance, and Cytocompatibility of a Novel ZK30-Cu-Mn Biomedical Alloy Produced by Selective Laser Melting. Int J Bioprint, 7:78–89.

Park HJ, Kim JY, Kim J, et al., 2009, Silver-ion-mediated Reactive Oxygen Species Generation Affecting Bactericidal Activity. Water Res, 43:1027–32.

Chernousova S, Epple M, 2013, Silver as Antibacterial Agent: Ion, Nanoparticle, and Metal. Angew Chemie Int Ed, 52:1636–53.

Kedziora A, Speruda M, Krzyzewska E, et al., 2018, Similarities and Differences between Silver Ions and Silver in Nanoforms as Antibacterial Agents. Int J Mol Sci, 19:444.

Lemire JA, Harrison JJ, Turner RJ, 2013, Antimicrobial Activity of Metals: Mechanisms, Molecular Targets and Applications. Nat Rev Microbiol, 11:371–84.

Perreault F, de Faria AF, Nejati S, et al., 2015, Antimicrobial Properties of Graphene Oxide Nanosheets: Why Size Matters. ACS Nano, 9:7226–36.

Chung H, Kim MJ, Ko K, et al., 2015, Effects of Graphene Oxides on Soil Enzyme Activity and Microbial Biomass. Sci Total Environ, 514:307–13.

Gurunathan S, Han JW, Dayem AA, et al., 2013, Antibacterial Activity of Dithiothreitol Reduced Graphene Oxide. J Ind Eng Chem, 19:1280–8.

Das KK, Das SN, Dhundasi SA, 2008, Nickel, its Adverse Health Effects and Oxidative. Indian J Med Res, 128:412–25.

Abdel-Rahman LH, Abu-Dief AM, Moustafa H, et al., 2020, Design and Nonlinear Optical Properties (NLO) Using DFT Approach of New Cr(III), VO(II), and Ni(II) Chelates Incorporating Tri-dentate Imine Ligand for DNA Interaction, Antimicrobial, Anticancer Activities and Molecular Docking Studies. Arab J Chem, 13:649–70.

Ohtste N, Hirano Y, Yamaguchi K, et al., 2019, Surface Characteristics, Ni ion Release, and Antibacterial Efficacy of Anodized NiTi Alloy Using HNO3 Electrolyte of Various Concentrations. Appl Surf Sci, 492:785–91.

Vanithakumari SC, Jena G, Sofia S, et al., 2020, Fabrication of Superhydrophobic Titanium Surfaces with Superior Antibacterial Properties Using Graphene Oxide and Silanized Silica Nanoparticles. Surf Coat Technol, 400:126074.

Liu S, Zeng TH, Hofmann M, et al., 2011, Antibacterial Activity of Graphite, Graphite Oxide, Graphene Oxide, and Reduced Graphene Oxide: Membrane and Oxidative Stress. ACS Nano, 5:6971–80.

Salas E C, Sun Z, Luttge A, et al., 2010, Reduction of Graphene Oxide via Bacterial Respiration. ACS Nano, 4:4852–6.

Panda S, Rout TK, Prusty AD, et al., 2018, Electron Transfer Directed Antibacterial Properties of Graphene Oxide on Metals. Adv Mater, 30:1702149.

Qiu J, Wang D, Geng H, et al., 2017, How Oxygen-Containing Groups on Graphene Influence the Antibacterial Behaviors. Adv Mater Interfaces, 4:1700228.

Pieper H, Chercheja S, Eigler S, et al., 2016, Endoperoxides Revealed as Origin of the Toxicity of Graphene Oxide. Angew Chem Int Edi, 55:405–7.

Zhao J, Wang Z, White JC, et al., 2014, Graphene in the Aquatic Environment: Adsorption, Dispersion, Toxicity and Transformation. Environ Sci Technol, 48:9995–10009.

Wang G, Feng H, Gao A, et al., 2016, Extracellular Electron Transfer from Aerobic Bacteria to Au-Loaded TiO2 Semiconductor without Light: A New Bacteria-Killing Mechanism Other than Localized Surface Plasmon Resonance or Microbial Fuel Cells. ACS Appl Mater Interfaces, 8:24509–16.

Hassan RY, Wollenberger U, 2016, Mediated Bioelectrochemical System for Biosensing the Cell Viability of Staphylococcus aureus. Ana Bioanal Chem, 408:579–87.



  • There are currently no refbacks.

Copyright (c) 2021 Author(s).

License URL: