Digital Light Processing Based Three-dimensional Printing for Medical Applications

Jiumeng Zhang, Qipeng Hu, Shuai Wang, Jie Tao, Maling Gou

Article ID: 242
Vol 6, Issue 1, 2020, Article identifier:242

VIEWS - 5552 (Abstract) 759 (PDF)


An additive manufacturing technology based on projection light, digital light processing (DLP), three-dimensional (3D) printing, has been widely applied in the field of medical products production and development. The precision projection light, reflected by a digital micromirror device of million pixels instead of one focused point, provides this technology both printing accuracy and printing speed. In particular, this printing technology provides a relatively mild condition to cells due to its non-direct contact. This review introduces the DLP-based 3D printing technology and its applications in medicine, including precise medical devices, functionalized artificial tissues, and specific drug delivery systems. The products are particularly discussed for their significance in medicine. This review indicates that the DLP-based 3D printing technology provides a potential tool for biological research and clinical medicine. While, it is faced to the challenges of scale-up of its usage and waiting period of regulatory approval.


Digital light processing, Three-dimensional print, Medical devices, Tissue engineering, Pharmacy

Full Text:

Download PDF

Included Database


Kang HW, Lee SJ, Ko IK, et al., 2016, A 3D Bioprinting System to Produce Human-Scale Tissue Constructs with Structural Integrity. Nat Biotechnol, 34(3):312–9. DOI: 10.1038/nbt.3413.

Murphy SV, Atala A, 2014, 3D Bioprinting of Tissues and Organs. Nat Biotechnol, 32(8): 773–85. DOI: 10.1038/ nbt.2958.

Ricles JCC, Di Prima M, Oh SS, 2018, Regulating 3D-Printed Medical Products. Sci Transl Med, 10(461):6.

Rybicki FJ, 2018, Medical 3D Printing and the Physician- Artist. Lancet, 391(10121):651–2. DOI: 10.1016/s0140- 6736(18)30212-5.

Lu Y, Mapili G, Suhali G, et al., 2006, A Digital Micro-Mirror Device-Based System for the Microfabrication of Complex, Spatially Patterned Tissue Engineering Scaffolds. J Biomed Mater Res A, 77(2):396–405. DOI: 10.1002/jbm.a.30601.

Kuang X, Wu J, Chen K, et al., 2019, Grayscale Digital Light Processing 3D Printing for Highly Functionally Graded Materials. Sci Adv, 5(5):eaav5790. DOI: 10.1126/sciadv. aav5790.

Pateman CJ, Harding AJ, Glen A, et al., 2015, Nerve Guides Manufactured from Photocurable Polymers to Aid Peripheral Nerve Repair. Biomaterials, 49:13. DOI: 10.1016/j. biomaterials.2015.01.055.

Gou M, Qu X, Zhu W, et al., 2014, Bio-Inspired Detoxification Using 3D-Printed Hydrogel Nanocomposites. Nat Commun, 5:3774. DOI: 10.1038/ncomms4774.

Grigoryan B, Paulsen SJ, Corbett DC, et al., 2019, Multivascular Networks and Functional Intravascular Topologies Within Biocompatible Hydrogels. Science, 364:8.

Liu X, Tao J, Liu J, et al., 2019, 3D Printing Enabled Customization of Functional Microgels. ACS Appl Mater Interfaces, 11(13):12209–15. DOI: 10.1021/acsami.8b18701.

Hull CW, Spence ST, Lewis CW, et al., 1998, Stereolithographic Curl Reduction. US, US 5772947 A.

Ngo TD, Kashani A, Imbalzano G, et al., 2018, Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges. Compos Part B, 143:172–96. DOI: 10.1016/j.compositesb.2018.02.012.

Ligon SC, Liska R, Stampfl J, et al., 2017, Polymers for 3D Printing and Customized Additive Manufacturing. Chem Rev, 117(15):10212–90. DOI: 10.1021/acs.chemrev.7b00074.

Vijayavenkataraman S, Yan WC, Lu WF, et al., 2018, 3D Bioprinting of Tissues and Organs for Regenerative Medicine. Adv Drug Deliv Rev, 132:296–332. DOI: 10.1016/j. addr.2018.07.004.

Zhu W, Ma X, Gou M, et al., 2016, 3D Printing of Functional Biomaterials for Tissue Engineering. Curr Opin Biotechnol, 40:103–12. DOI: 10.1016/j.copbio.2016.03.014.

Soman P, Chung PH, Zhang AP, et al., 2013, Digital Microfabrication of User-Defined 3D Microstructures in Cell-Laden Hydrogels. Biotechnol Bioeng, 110(11):3038–47. DOI: 10.1002/bit.24957.

Xue D, Wang Y, Zhang J, et al., 2018, Projection-Based 3D Printing of Cell Patterning Scaffolds with Multiscale Channels. ACS Appl Mater Interfaces, 10(23):19428–35. DOI: 10.1021/acsami.8b03867.

Saha SK, Wang D, Nguyen VH, et al., 2019, Scalable Submicrometer Additive Manufacturing. Science, 366(6461):105-109. DOI: 10.1126/science.aax8760.

Bernal PN, Delrot P, Loterie D, et al., 2019, Volumetric Bioprinting of Complex Living-Tissue Constructs Within Seconds. Adv Mater, 31:e1904209. DOI: 10.1002/ adma.201904209.

Tumbleston JR, Shirvanyants D, Ermoshkin N, et al., 2015, Continuous Liquid Interface Production of3D Objects. Science, 347:5.

Kelly BE, Bhattacharya I, Heidari H, et al., 2019, Volumetric Additive Manufacturing Via Tomographic Reconstruction. Science, 8(363):1075–9.

Kim SH, Yeon YK, Lee JM, et al., 2018, Precisely Printable and Biocompatible Silk Fibroin Bioink for Digital Light Processing 3D Printing. Nat Commun, 9(1):1620. DOI: 10.1038/s41467-018-03759-y.

Kim K, Zhu W, Qu X, et al., 2014, 3D Optical Printing of Piezoelectric Nanoparticle-Polymer Composite Materials. ACS Nano, 8:8.

Fantino E, Chiappone A, Roppolo I, et al., 2016, 3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles. Adv Mater, 28(19):3712–7. DOI: 10.1002/adma.201505109.

US Food and Drug Administration, is the Product A Medical Device? Available from:

Rindelaub JD, Baird Z, Lindner BA, et al., 2019, Identifying Extractable Profiles from 3D Printed Medical Devices. PLoS One, 14(5):e0217137. DOI: 10.1371/journal.pone.0217137.

Pashuck ET, Stevens M, 2016, From Clinical Imaging to Implantation of 3D Printed Tissues. Nat Biotechnol, 34(3):295–6. DOI: 10.1038/nbt.3503.

Tack P, Victor J, Gemmel P, et al., 2016, 3D-Printing Techniques in a Medical Setting: A Systematic Literature Review. Biomed Eng Online, 15(1):115. DOI: 10.1186/ s12938-016-0236-4.

Paul GM, Amin R, Wen P, et al., 2018, Medical Applications for 3D Printing: Recent Developments. Mo Med, 115(1):75–81.

Kim MJ, Lee SR, Lee MY, et al., 2017, Characterization of 3D Printing Techniques: Toward Patient Specific Quality Assurance Spine-Shaped Phantom for Stereotactic Body Radiation Therapy. PLoS One, 12(5):e0176227. DOI: 10.1371/journal.pone.0176227.

Kim SY, Shin YS, Jung HD, et al., 2018, Precision and Trueness of Dental Models Manufactured with Different 3-Dimensional Printing Techniques. Am J Orthod Dentofacial Orthop, 153(1):144–53. DOI: 10.1016/j.ajodo.2017.05.025.

Hohne C, Schmitter M, 2019, 3D Printed Teeth for the Preclinical Education of Dental Students. J Dent Educ, 83:1100–6. DOI: 10.21815/jde.019.103.

Brown GB, Currier GF, Kadioglu O, et al., 2018, Accuracy of 3-Dimensional Printed Dental Models Reconstructed from Digital Intraoral Impressions. Am J Orthod Dentofacial Orthop, 154(5):733–9. DOI: 10.1016/j.ajodo.2018.06.009.

Zhu W, Tringale KR, Woller SA, et al., 2018, Rapid Continuous 3D Printing of Customizable Peripheral Nerve Guidance Conduits. Mater Today, 21(9):951–9. DOI: 10.1016/j.mattod.2018.04.001.

Moin DA, Wismeijer DH, 2017, A Novel Approach for Custom Three-Dimensional Printing of a Zirconia Root Analogue Implant by Digital Light Processing. Clin Oral Implants Res, 28(6):668–70. DOI: 10.1111/clr.12859.

Zhu W, Li J, Leong YJ, et al., 2015, 3D-Printed Artificial Microfish. Adv Mater, 27(30):4411–7. DOI: 10.1002/ adma.201501372.

Fu X, Xia B, Ji B, et al., 2019, Flow Controllable Three- Dimensional Paper-Based Microfluidic Analytical Devices Fabricated by 3D Printing Technology. Anal Chim Acta, 1065:64–70. DOI: 10.1016/j.aca.2019.02.046.

Tao J, Zhang J, Du T, et al., 2019, Rapid 3D Printing of Functional Nanoparticle-Enhanced Conduits for Effective Nerve Repair. Acta Biomater, 90:49–59. DOI: 10.1016/j. actbio.2019.03.047.

Osman RB, van der Veen AJ, Huiberts D, et al., 2017, 3D-Printing Zirconia Implants; A Dream or a Reality? An in vitro Study Evaluating the Dimensional Accuracy, Surface Topography and Mechanical Properties of Printed Zirconia Implant and Discs. J Mech Behav Biomed Mater, 75:521–8. DOI: 10.1016/j.jmbbm.2017.08.018.

Park C, Han YD, Kim HV, et al., 2018, Double-Sided 3D Printing on Paper Towards Mass Production of Three- Dimensional Paper-Based Microfluidic Analytical Devices (3D-muPADs). Lab Chip, 18(11):1533–8. DOI: 10.1039/ c8lc00367j.

Bianco P, Robey PG, 2001, Stem Cells in Tissue Engineering. Nature, 414:4.

Ma X, Liu J, Zhu W, et al., 2018, 3D Bioprinting of Functional Tissue Models for Personalized Drug Screening and in vitro Disease Modeling. Adv Drug Deliv Rev, 132:235–51. DOI: 10.1016/j.addr.2018.06.011.

Anwar S, Singh GK, Miller J, et al., 2018, 3D Printing is a Transformative Technology in Congenital Heart Disease. JACC Basic Transl Sci, 3(2):294–312. DOI: 10.1016/j. jacbts.2017.10.003.

Kadry H, Wadnap S, Xu C, et al., 2019, Digital Light Processing (DLP) 3D-Printing Technology and Photoreactive Polymers in Fabrication of Modified-Release Tablets. Eur J Pharm Sci, 135:60–7. DOI: 10.1016/j.ejps.2019.05.008.

Soman P, Kelber JA, Lee JW, et al., 2012, Cancer Cell Migration Within 3D Layer-By-Layer Microfabricated Photocrosslinked PEG Scaffolds with Tunable Stiffness. Biomaterials, 33(29):7064–70. DOI: 10.1016/j. biomaterials.2012.06.012.

Peery AF, Crockett SD, Murphy CC, et al., 2019, Burden and Cost of Gastrointestinal, Liver, and Pancreatic Diseases in the United States: Update 2018. Gastroenterology, 156(1):254– 72, e211. DOI: 10.1053/j.gastro.2018.08.063.

Zhu W, Qu X, Zhu J, et al., 2017, Direct 3D Bioprinting of Prevascularized Tissue Constructs with Complex Microarchitecture. Biomaterials, 124:106–15. DOI: 10.1016/j.biomaterials.2017.01.042.

Ma X, Qu X, Zhu W, et al., 2016, Deterministically Patterned Biomimetic Human iPSC-Derived Hepatic Model Via Rapid 3D Bioprinting. Proc Natl Acad Sci U S A, 113(8):2206–11. DOI: 10.1073/pnas.1524510113.

Petersen TH, Calle EA, Zhao L, et al., 2010, Tissue- Engineered Lungs for in vivo Implantation. Science, 329:5.

Horvath L, Umehara Y, Jud C, et al., 2015, Engineering an in vitro Air-Blood Barrier by 3D Bioprinting. Sci Rep, 5:7974. DOI: 10.1038/srep07974.

Dean D, Jonathan W, Siblani A, et al., 2012, Continuous Digital Light Processing (cDLP): Highly Accurate Additive Manufacturing of Tissue Engineered Bone Scaffolds. Virtual Phys Prototyp, 7(1):13–24. DOI: 10.1080/17452759.2012.673152.

Lim KS, Levato R, Costa PF, et al., 2018, Bio-Resin for High Resolution Lithography-Based Biofabrication of Complex Cell-Laden Constructs. Biofabrication, 10(3):034101. DOI: 10.1088/1758-5090/aac00c.

Ma X, Dewan S, Liu J, et al., 2019, 3D Printed Micro-Scale Force Gauge Arrays to Improve Human Cardiac Tissue Maturation and Enable High Throughput Drug Testing. Acta Biomater, 95:319–27. DOI: 10.1016/j.actbio.2018.12.026.

Koffler J, Zhu W, Qu X, et al., 2019, Biomimetic 3D-Printed Scaffolds for Spinal Cord Injury Repair. Nat Med, 25(2):263– 9. DOI: 10.1038/s41591-018-0296-z.

Mourino V, Boccaccini AR, 2010, Bone Tissue Engineering Therapeutics: Controlled Drug Delivery in Three- Dimensional Scaffolds. J R Soc Interface, 7(43):209–27. DOI: 10.1098/rsif.2009.0379.

Seitz H, Rieder W, Irsen S, et al., 2005, Three-Dimensional Printing of Porous Ceramic Scaffolds for Bone Tissue Engineering. J Biomed Mater Res B Appl Biomater, 74(2):782–8. DOI: 10.1002/jbm.b.30291.

Gao G, Cui X, 2016, Three-Dimensional Bioprinting in Tissue Engineering and Regenerative Medicine. Biotechnol Lett, 38(2):203–11. DOI: 10.1007/s10529-015-1975-1.

Scaglione MS, Kliethermes S, Cao G, et al., 2015, The Epidemiology of Cirrhosis in the United States A Population-based Study. Orig Artic, 49:7.

Cheung DY, Duan B, Butcher JT, 2015, Current Progress in Tissue Engineering of Heart Valves: Multiscale Problems, Multiscale Solutions. Expert Opin Biol Ther, 15(8):18.

Nguyen AH, Marsh P, Schmiess-Heine L, et al., 2019, Cardiac Tissue Engineering: State-of-the-art Methods and Outlook. J Biol Eng, 13:57. DOI: 10.1186/s13036-019-0185-0.

Liu J, He J, Liu J, et al., 2019, Rapid 3D Bioprinting of in vitro Cardiac Tissue Models Using Human Embryonic Stem Cell-Derived Cardiomyocytes. Bioprinting, 13: e00040. DOI: 10.1016/j.bprint.2019.e00040.

Ma ZLY, Yang Y, Wang J, et al., 2019, Research Progress and Prospects of Tissue Engineering Scaffolds for Spinal Cord Injury Repair and Protection. Regen Med, 14(9):887–98.

Ashammakhi N, Kim H, Ehsanipour A, et al., 2019, Regenerative Therapy for Spinal Cord Injury. Tissue Eng Part B Rev. DOI: 10.1089/ten.TEB.2019.0182.

Duan B, Hockaday LA, Kang KH, et al., 2013, 3D Bioprinting of Heterogeneous Aortic Valve Conduits with Alginate/ Gelatin Hydrogels. J Biomed Mater Res A, 101(5):1255–64. DOI: 10.1002/jbm.a.34420.

Pedde RD, Mirani B, Navaei A, et al., 2017, Emerging Biofabrication Strategies for Engineering Complex Tissue Constructs. Adv Mater, 29(19): e1606061. DOI: 10.1002/ adma.201606061.

Amir-Aslani A, Mangematin V, 2010, The Future of Drug Discovery and Development: Shifting Emphasis Towards Personalized Medicine. Technol Forecast Soc Change, 77(2):203–17. DOI: 10.1016/j.techfore.2009.09.005.

Trenfield SJ, Awad A, Goyanes A, et al., 2018, 3D Printing Pharmaceuticals: Drug Development to Frontline Care. Trends Pharmacol Sci, 39(5):440–51. DOI: 10.1016/j. tips.2018.02.006.

Mateen R, Ali MM, Hoare T, 2018, A Printable Hydrogel Microarray for Drug Screening Avoids False Positives Associated with Promiscuous Aggregating Inhibitors. Nat Commun, 9(1):602. DOI: 10.1038/s41467-018-02956-z.

Fan Y, Nguyen DT, Akay Y, et al., 2016, Engineering a Brain Cancer Chip for High-throughput Drug Screening. Sci Rep, 6:25062. DOI: 10.1038/srep25062.

Zhang YS, Yue K, Aleman J, et al., 2017, 3D Bioprinting for Tissue and Organ Fabrication. Ann Biomed Eng, 45(1):148– 63. DOI: 10.1007/s10439-016-1612-8.

2015, First 3D-Printed Pill. Nat Biotechnol, 33(10):1014. DOI: 10.1038/nbt1015-1014a.

Economidou SN, Lamprou DA, Douroumis D, 2018, 3D Printing Applications for Transdermal Drug Delivery. Int J Pharm, 544(2):415–24. DOI: 10.1016/j.ijpharm.2018.01.031.

Tao J, Xu X, Wang S, et al., 2019, Polydiacetylene- Nanoparticle-Functionalized Microgels for Topical Bacterial Infection Treatment. ACS Macro Lett, 8:563–8. DOI: 10.1021/acsmacrolett.9b00196.

Yang Y, Du T, Zhang J, et al., 2017, A 3D-Engineered Conformal Implant Releases DNA Nanocomplexs for Eradicating the Postsurgery Residual Glioblastoma. Adv Sci (Weinh), 4(8):1600491. DOI: 10.1002/advs.201600491.

Xu X, Tao J, Wang S, et al., 2019, 3D Printing of Nerve Conduits with Nanoparticle-Encapsulated RGFP966. Appl Mater Today, 16:247–56. DOI: 10.1016/j.apmt.2019.05.014.

Kotz F, Arnold K, Bauer W, et al., 2017, Three-Dimensional Printing of Transparent Fused Silica Glass. Nature, 544(7650):337-9. DOI: 10.1038/nature22061.



  • There are currently no refbacks.

Copyright (c) 2020 Zhang, et al.

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.